setup_i2.gif (2009 bytes)
Windows95 Trumpet Winsock

　

I. Setup of Dial-Up Networking Connection to Shinbiro

1. Double-click <My Computer>, and open <Dial-Up Networking> folder.

step2-01.gif (2199 bytes)

2. Double-click <Make New Connection>.

3. Name your connection "Shinbiro" and choose the type of your modem, then click <Next>.

step2-02.gif (6857 bytes)

4. Enter the area code and telephone number(01431) provided by Shinbiro for local dial-up, then select county code from the drop-down menu.

step2-06.jpg (21561 bytes)

5. Click <Next> and then <Finish>. You will see the icon of Shinbiro in your <Dial-Up Networking>.

step2-08.gif (2522 bytes)

6. Using your right mouse button, click on the Shinbiro icon, then select <Properties> on the pop-up menu.

step2-09.jpg (20364 bytes)

7. Don't check <Use area code and country code> and click <Server Types>

8. Type of Dial-Up Server is set to 'PPP: Windows 95, Windows NT 3.5, Internet'.

step2-10.gif (4463 bytes)

9. Check <Enable software compression> under 'Advanced Options' and <TCP/IP> under 'Allowed Network Protocols'.

10. Click <TCP/IP Settings>. 'Server assigned IP address' should be checked and 'Specify name Server addressed' should be checked.

step2-11.gif (7872 bytes)

11. Primary DNS is 202.30.143.11 and Secondary DNS is 203.240.193.11

12. Primary WINS and Secondary WINS should be blank.

13. Click 'Use IP header compression' and 'Use default gateway on remote network'.

14. Click <OK> and <OK> again.


II. Instructions on connect to Shinbiro

1. Double-click <My Computer>, and open <Dial-Up Networking> folder.

2. Double-click <Shinbiro> icon.

step2-12.jpg (15479 bytes)

3. Enter your username and password in <Connect To> dialog box.

step2-15.gif (3226 bytes)

4. Click <Connect>. The modem will dial and then connect.

5. Run your web browser and surf the net.

　

　

Copyright © 1997~1999 Shinbiro. All right reserved.
Helpdesk | 02-725-4286, 080-725-4357, help-eng@shinbiro.com